Suction top induction, Round switch, PIRCeiling lamp, New style
Brief Introduction of Product Function
Main technical parameters
| working voltage | AC170V-AC250V 50HZ |
| load function | ≤ 200W |
| four-wire induction distance | 5 ≤ 12 meters |
| induction angle | 120 degrees up and down 110 degrees |
| delay time | 30s |
| suitable load | ceiling lamp, incandescent lamp, exhaust fan, energy saving lamp, fluorescent lamp |
Install diagram Note
1. When installing this switch, please turn off the power supply and operate;
2. This switch must work only when the light is dim and does not work during the day;
3. When installing, avoid the place where the strong light shines, and the distance from the lamp is more than 0.5 meters;
4. This switch is suitable for light bulb, energy saving lamp and load power ≤ 200W. Short circuit is strictly prohibited, line connection is wrong or overloaded;
5. The height of the switch should be between 1.2 m and 2 m when installed as wall type, and between 3 m and 4 m when installed as suction top type, otherwise the sensitivity of the switch should be affected.
6. This product adopts the applicable four-wire design wiring mode, according to the national electrical standard, see the figure;
7. After the power is connected, the switch is automatically tested and entered the working state after a few seconds. Under normal use, the switch is protected for three years. (excluding improper human use)
Features
The advantages of the intelligent switch are good stability, fast transmission speed and strong anti-interference ability. The intelligent switch uses a special signal line alone, and it is not subject to radiation clutter such as power lines and radios, and the operation stability of the product is very strong. Stability in terms of performance will determine the speed and immunity to interference of the transmitted signal.
The product adopts good sensitivity detector. It gathers automatism, convenient safe, saving-energy and practical functions. It is easy to install and used widely.
About Us
Shenzhen Yuan Fang Hua Technology Co., Ltd. has been committed to the infrared induction switch products sales since 2011. The company is located in the shenzhen special economic zone of China, a borders inland, near Hong Kong, Macao, Taiwan and overseas. Geographical position advantageous. We have many experienced engineers and production expert, and it can guarantee the quality of the products.
We also has bridle-wise manage team ,design team and QC team ,and can supply customer their desired sample in the earliest date , arrange your order correctly, strictly control the mass production quality and lead time , and let the business goes smoothly !
Product Tags:
|
|
Smart Infrared Induction Switch Suction Top / Round Ceiling Pir Sensor Switch Images
|
